DUMP BODY TYPE KS 10

KS 10-2800 m

• length cargo box: approx. 2,800 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.2 m3
• weight of the superstructure: approx. 600 kg

KS 10-3000 mm

• cargo box length: 3,000 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.4 m3
• weight of the superstructure: approx. 630 kg

KS 10-3300 mm

• cargo box length: 3,300 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.6 m3
• weight of the superstructure: approx. 660 kg

KS 10-3600 mm

• cargo box length: 3,600 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.8 m3
• weight of the superstructure: approx. 690 kg

Standard equipment:

• for truck chassis equipped with a PTO

• number of axles: 2

• type: three sided tipper

• technical load capacity: cca. 1.600 kg

• height of the front wall: 450 mm

• the material of the front wall and the thickness: St 52/2 mm

• the material of the side / rear board and the thickness: St 52/2 mm

• side board: singled one piece

• the opening of the side boards: flap

• the opening of the back board: flap

• floor material and the thickness: HARDOX 400 / 2.5 mm (St 52)

• the system raising of the tipper: centrally located telescopic hydraulic cylinder

• complete hydraulics

• drive hydraulic pumps over power outputs from vehicles (PTO)

• control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat

• steel parts are sandblasted and painted twice

• sub frame painted in the color of the vehicle

• tipper body painted in monochrome color of the vehicle cab or customer specification

• side underrun protection according to CE standards - not required

• mudguards on the rear wheels

• electrical installations

• outline marker lights

• attest

Additional equipment at extra charge

• excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission

• toolbox with carriers

• elevated front wall (600 mm) with mesh protection of the cabin

• elevated side walls (removable, mesh + 400 mm)

• aluminum side and back boards

• spare wheel carrier

• side underrun protection according to CE standards

• for truck chassis with no possibility of installing excerpts from gearbox: Drive and hydraulic system to raise over hydro / electric generators