DUMP BODY TYPE KS 90

for truck chassis from 14,001 to 18,000 kg

KS 90-4000 mm
• cargo box length: 4,000 mm
• Width: 2,420 mm
• height of side / rear side: 600 mm
• cargo box volume: approx. 5.7 m3
• weight of the superstructure: approx. 1,680 kg

KS 90-4200 mm
• cargo box length: 4,200 mm
• Width: 2,420 mm
• height of side / rear side: 600 mm
• cargo box volume: approx. 6 m3
• weight of the superstructure: approx. 1,760 kg

KS 90-4400 mm
• cargo box length: 4,400 mm
• Width: 2,420 mm
• height of side / rear side: 600 mm
• cargo box volume: 6.3 m3
• weight of the superstructure: approx. 1,840 kg

KS 90-4600 mm
• cargo box length: 4,600 mm
• Width: 2,420 mm
• height of side / rear side: 600 mm
• cargo box volume: approx. 6.6 m3
• weight of the superstructure: approx. 1,920 kg

KS 90-4800 mm
• cargo box length: 4,800 mm
• Width: 2,420 mm
• height of side / rear side: 600 mm
• cargo box volume: 6.9 m3
• weight of the superstructure: approx. 1.990 kg

Standard equipment:

  • for truck chassis equipped with a PTO
  • view mirrors on the truck chassis for the body width: 2.500 – 2.600 mm 
  • number of axles: 2
  • type: three sided tipper
  • technical load capacity: 11.200 kg
  • height of the front wall: 800 mm
  • the material of the front wall and the thickness: St 52 / 2,5 mm
  • the material of the side / rear board and the thickness: St 52 / 2,5 mm
  • side board: singled one piece
  • the opening of the side boards: flap
  • the opening of the back board: deflection (automatic)
  • floor material and the thickness: HARDOX 400 / 4 mm
  • the system raising of the tipper: centrally located telescopic hydraulic cylinder
  • complete hydraulics
  • drive hydraulic pumps over power outputs from vehicles (PTO)
  • control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
  • steel parts are sandblasted and painted twice
  • sub frame painted in the color of the vehicle
  • tipper body painted in monochrome color of the vehicle cab or customer specification
  • side underrun protection according to CE standards 
  • mudguards on the rear wheels
  • electrical installations
  • outline marker lights
  • attest

Additional equipment at extra charge:

  • excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
  • installation of hydraulics for tipper trailer
  • toolbox with carriers
  • material / floor thickness: HARDOX 400 – 5 mm
  • double opening of the rear wall, flap / deflection (manual)
  • spring set for an easier opening of the side boards
  • double opening of the rear wall, flap / deflection with spring set
  • the side boards are two-pieced, flap opened
  • steel side walls height 800 mm/front wall 1.100 mm
  • steel side walls height 1.000 mm/front wall 1.200 mm
  • aluminum side and rear walls height 600 mm / front steel wall height 900 mm
  • aluminum side and rear walls height 800 mm / front steel wall height 1.100 mm
  • aluminum side and rear walls height 1.000 mm / front steel wall height 1.300 mm
  • Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 600 mm
  • installation of hydraulics for tipper trailer with Bordmatic
  • spare wheel carrier

Our partners

Hidraulika Kurelja d.o.o.

za proizvodnju i servis specijalnih hidrauličnih konstrukcija i opreme, unutrašnju i spoljnu trgovinu i zastupanje

Direktor
Krstić Sreten, dipl.pravnik
Mob: 062/287-202
Tel: 034/333-171
E-mail: direktor@hkproleter.com