KS 60-3600 mm
• cargo box length: 3,600 mm
• Width: 2,300 mm
• height of side / rear side: 500 mm
• cargo box volume: approx. 4.1 m3
• weight of the superstructure: approx. 1,420 kg
KS 60-4000 mm
• cargo box length: 4,000 mm
• Width: 2,300 mm
• height of side / rear side: 500 mm
• cargo box volume: approx. 4.6 m3
• weight of the superstructure: approx. 1,490 kg
KS 60-4400 mm
• cargo box length: 4,400 mm
• Width: 2,300 mm
• height of side / rear side: 500 mm
• cargo box volume: approx. 5 m3
• weight of the superstructure: approx. 1.590 kg
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 2
- type: three sided tipper
- technical load capacity: cca. 7.600 kg
- height of the front wall: 800 mm
- the material of the front wall and the thickness: St 52 / 2,5 mm
- the material of the side / rear board and the thickness: St 52 / 2,5 mm
- side board: singled one piece
- the opening of the side boards: flap
- the opening of the back board: deflection (automatic)
- floor material and the thickness: HARDOX 400 / 4 mm
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
- steel parts are sandblasted and painted twice
- sub frame painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- attest
Additional equipment at extra charge:
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- installation of hydraulics for tipper trailer
- toolbox with carriers
- material / floor thickness: HARDOX 400 – 5 mm
- double opening of the rear wall, flap / deflection (manual)
- double opening of the rear wall, flap / deflection with spring set
- steel side walls height 600 mm/front wall 900 mm
- aluminum side and rear walls height 500 mm / front steel wall height 800 mm
- aluminum side and rear walls height 600 mm / front steel wall height 900 mm
- elevated side walls (removable, mesh + 400 mm)
- spare wheel carrier
- performance pallet width of the tipper 2.420 mm