DUMP BODY TYPE KS 160

for truck chassis from 18,001 to 26,000 kg

KS 160-4500 mm
• cargo box length: 4,500 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: approx. 8.7 m3
• weight of the superstructure: approx. 2,700 kg

KS 160-4800 m
• cargo box length: 4,800 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: 9.4 m3
• weight of the superstructure: approx. 2,800 kg

KS 160-5000 mm
• cargo box length: 5,000 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: 9.8 m3
• weight of body: about 2,950 kg

KS 160-5200 mm
• cargo box length: 5,200 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: 10.2 m3
• weight of body: about 3,120 kg

Standard equipment:

  • for truck chassis equipped with a PTO
  • number of axles: 3type: three sided tipper
  • technical load capacity: cca. 15.500 kg
  • height of the front wall: 1.000 mm
  • the material of the front wall and the thickness: St 52 / 3 mm
  • the material of the side / rear board and the thickness: St 52 / 3 mm
  • side board: singled one piece
  • the opening of the side boards: deflection
  • the opening of the back board: deflection (automatic)
  • floor material and the thickness: HARDOX 400 / 5 mm
  • the system raising of the tipper: centrally located telescopic hydraulic cylinder
  • complete hydraulics
  • drive hydraulic pumps over power outputs from vehicles (PTO)
  • control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
  • steel parts are sandblasted and painted twice
  • sub frame painted in the color of the vehicle
  • tipper body painted in monochrome color of the vehicle cab or customer specification
  • side underrun protection according to CE standards 
  • mudguards on the rear wheels
  • electrical installations
  • outline marker lights
  • attest

Additional equipment at extra charge:

  • excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
  • installation of hydraulics for tipper trailer
  • toolbox with carriers
  • material / floor thickness: HARDOX 400 – 6 mm
  • the material of the side / rear board and the thickness 4 mm
  • double opening of the rear wall, flap / deflection (manual)
  • double opening of the singled side boards, deflection/ flap with spring set
  • double side boards, opened by deflection
  • double opening of the two-part side boards, deflection / flap
  • demountable middle pillars at doubled side boards
  • steel side walls height 1.000 mm / front wall 1.200 mm
  • steel side walls height 1.100 mm / front wall 1.300 mm
  • aluminum side and rear walls height 900 mm, profile 75 / 60 /  front steel wall height 1.100 mm
  • aluminum side and rear walls height 1.000 mm, profile 75 / 60 /  front steel wall height 1.200 mm
  • Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 850 mm
  • Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 1.100 mm
  • installation of hydraulics for tipper trailer with Bordmatic
  • performance pallet width of the tipper 2.420 mm
  • spare wheel carrier
  • spare wheel carrier, lying under the sub frame of the tipper
  • extension for unloading asphalt 300 mm (demountable)
  • tarpaulin cover for asphalt, with no mechanism (heat resistant)
  • tarpaulin cover with mechanism (normal)

Our partners

Hidraulika Kurelja d.o.o.

za proizvodnju i servis specijalnih hidrauličnih konstrukcija i opreme, unutrašnju i spoljnu trgovinu i zastupanje

Direktor
Krstić Sreten, dipl.pravnik
Mob: 062/287-202
Tel: 034/333-171
E-mail: direktor@hkproleter.com