HYDRAULIC THREE CYLINDERS BOOM LIFT PPRP H 12/ TP 12

• For rigid chassis total weight of 3,500 kg
• Driving the vehicle category B
• A preferred wheelbase of 3,500 mm for a single cabin (1 + 1)
• Number 2 axle truck chassis
• Type of hydraulic platforms - articulated three cylinders
• Working height 12.8 m Platform
• The maximum lateral reach of 5.8 m
• Drive the platform with hydraulic PTO transmission from the vehicle
• Management platform electro-hydraulic buckets of aerial platforms from the ground, additional manual operation
• Ensuring border position twice
• The width of the platform drivable 2,000 mm
• The height of the platform drivable 2.440 mm
• Length of platform drivable 4.630 mm
• The maximum weight of 1,460 kg upgrades
• Minimum height from the floor working buckets drivable 700 mm
• The minimum height of the stabilizer from the floor and running 300 mm
• Stabilizers 4 pieces, pieces, power management with the ability of the individual
• The range of stabilizers in the working position a maximum of 2,500 mm
• Operating the air behind the boom barrier 4 m
• The maximum angle of lifting a third lever (mount aerial platforms) 180 0
• Working Basket of polyester capacity 200 kg
• Turning the dome indefinitely (except in the case when working with the pipes with water from buckets and brushes)
• Isolation Platform to 1,000 V (except when working with the pipes with water from buckets and brushes)
• Degree of protection IP 65 electrical equipment
• Safety standards according to CE standards
• Sandblasting and double coating subchassis colored truck, color platform according to customer
• The mudguards on the rear wheels
• Electrical
• Outline bright
• Certificate Protection at Work platform
• Verification of the complete vehicle

Accessories
• Water: Stable pipeline for water NO50 (2 "), the maximum pressure of p = 4 bar on the rotating part of the superstructure of the rotary turret to the work basket, quick disconnect fittings and pressure regulator
• Electricity: Electrical cable with the required number of sockets 220 V from the dome to the work basket to work with compressors from the working basket
• increased website: elevated site on the foot platform height of about 200 mm
• tool box: special tool box, measuring 800 × 800 × width platform, aluminum sheet, the door to the left and right sides
• Smoke-: Stable pipeline for water NO50 (2 "), the maximum pressure of p = 4 bar on the rotating part of the superstructure of the rotary turret to the work basket, quick disconnect fittings and pressure regulator + water spray under the work basket in order to protect from smoke

Our partners

Hidraulika Kurelja d.o.o.

za proizvodnju i servis specijalnih hidrauličnih konstrukcija i opreme, unutrašnju i spoljnu trgovinu i zastupanje

Direktor
Krstić Sreten, dipl.pravnik
Mob: 062/287-202
Tel: 034/333-171
E-mail: direktor@hkproleter.com