for truck chassis from 33,001 to 41,000 kg
HP 250 to 5800 mm
• cargo box length: 5,800 mm
• Width: 2,300 mm
• height of side / rear side: 1.100 mm
• cargo box volume: approx. 14.8 m3
• weight of the superstructure: approx. 4,800 kg
HP 250 to 6200 mm
• cargo box length: 6,200 mm
• Width: 2,300 mm
• height of side / rear side: 1.100 mm
• cargo box volume: approx. 15.7 m3
• weight of the superstructure: approx. 4,950 kg
HP 250 to 6400 mm
• cargo box length: 6,400 mm
• Width: 2,300 mm
• height of side / rear side: 1.100 mm
• cargo box volume: approx. 16.2 m3
• weight of the superstructure: approx. 5.150 kg
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 4
- type: three sided tipper
- technical load capacity: cca. 27.000 kg
- height of the front wall: 1.200 mm
- the material of the front wall and the thickness: St 52 / 4 mm
- the material of the side / rear board and the thickness: St 52 / 4 mm
- side boards: dual/doubled
- the opening of the side boards: deflection
- the opening of the back board: deflection (automatic)
- floor material and the thickness: HARDOX 400 / 6 mm
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
- steel parts are sandblasted and painted twice
- sub frame painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- attest
Additional equipment at extra charge:
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- installation of hydraulics for tipper trailer
- toolbox with carriers
- material / floor thickness: HARDOX 400 – 10 mm
- doubled opening of the double side walls, deflection / flap
- demountable middle pillars, on the doubled side walls
- steel side walls height 1.200 mm / front wall 1.300 mm
- aluminum side and rear walls height 1.100 mm, profile 75 / 60 / front steel wall height 1.200 mm
- aluminum side and rear walls height 1.200 mm, profile 75 / 60 / front steel wall height 1.300 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 1.100 mm
- installation of hydraulics for tipper trailer with Bordmatic
- spare wheel carrier
- spare wheel carrier, lying under the sub frame of the tipper
- extension for unloading asphalt 300 mm (demountable)
- tarpaulin cover for asphalt, with no mechanism (heat resistant)
- tarpaulin cover with mechanism (normal)
- folding rear underrun protection, especially for truck chassis intended for loading asphalt in the finisher
